Automatic Sensor Tap – Fixed Temperature

FIXED TEMPERATURE AUTOMATIC TAP

This automatic tap is designed to be installed at a preset temperature, which is controlled by a thermostatic mixing valve (please note, thermostatic regulators are sold separately). This enables a constant and measured temperature every time the tap is activated. This fixed temperature tap is designed for both public and commercial washrooms.

Convenient
Water starts flowing automatically when the hands are placed within the sensing range. When the hands are moved out of the sensing range, the water will stop flowing immediately.

Outstanding water saving effects
There will be no wasting of water as the water flows only when the users put the hands under the faucet with low flow rate of 6L/min.

Control
Designed with SCM. Stops water automatically when water flow exceeds 1 minute.

Adjustable distance
Easily adjustable sensor range.

Strainer device
Strainer can be removed and cleaned to prevent blocking.

Anti-blocking needle
The solenoid valve is protected by an anti-blocking needle inside.

• Suitable pressure: maximum: 0.05-0.8MPa(0.5-8.0 Bar ), recommended: 0.1-0.4MPa(1.0-4.0 Bar )
• Sensing range: 5-16cm
• Power supply: 4x 1.5V AA size Alkaline battery (DC Model), 100V-240V, 50/60Hz (AC Model)
• Battery durability: Approx. 109500 cycles (1.5 yrs @ 200 uses/day)
• Flow rate: 6L/min
• Water temperature: 1-45℃
• Size of inlet: G(½)''

View User Manual

Thermostatic Mixing Valve is sold separately >>